- +86 571 8501 2111
- [email protected]
- 459 Qianmo Road, Bezirk Binjiang, Hangzhou, China
LDM-100 monitors the gas turbidity and dust concentration in real-time and continuously in each process pipe and emission flue by measuring the ratio of optical intensity after laser transmission and original optical intensity.
LDM-100 monitors the gas turbidity and dust concentration in real-time and continuously in each process pipe and emission flue by measuring the ratio of optical intensity after laser transmission and original optical intensity.
Principle
LDM-100 adopts Laser Transmission Method to measure the dust concentration. The basalprinciple (refer to Figure 1.1)is using diode laser as the lamp-house. After the detecaser beams passing through the spectroscope, the reflected liaht is detected by thedetector and forms referenced sianals, Transmission light shines to the reflecting materiathrough the measured environment with dust, After the refected liaht traverses themeasured environment again, it is detected by detector and forms measuring sianals.According to the contrast of referenced sianals and measuring sianals, transmittanceinformation caused by dust is obtained.
| Parameters | Range | Details Transmittance: (0~100)%, (80~100)% Turbidity: (100~0)%~(20~0)% Extinction: (0~2.5)~(0~0.1) Measurement concentration: (0~5000) mg/m³ (Concentration is correlative with optical path length, it could be customized base on requirement) |
| Parameters | Precision | Transmittance/Turbidity: ± 1% Extinction: ± 0.002 |
| Optical path length | (0.5~15)m | – |
| Flue Temperature | (-20~600)°C | – |
| Flue Pressure | Instrument Air Purging: (-20~50)kPa Purging Fan: (-10~8)kPa |
– |
| Specifications | Response: (1~600)s (setting is available) Display Error: ≤ ± 1%F.S. Repetition: ≤ ± 1%F.S. Span Drift: ≤ ± 2%F.S. Enclosure Protection: IP 65 |
– |
| Interface Signals | Analogue Output: 2-channel (4~20)mA; Max: 500Ω Digital Output: RS485/GPRS Relay Output: 3-channel output (24V, 1A) |
– |
| Conditions | Power Supply: Measuring Unit: 24V DC <20W Purging Unit: 220 V AC <400W |
– |
| Conditions | Ambient Temperature: (-10~50)°C | – |
| Installation | Installation: In-situ | – |
The cement, the thermal power, the iron and steel, the metallurgy, the refinery, the aluminum, the petrochemical, the papermaking, the glass industry, and so on.
Sind Sie bereit, Ihre Abläufe mit branchenführenden Online-Analyselösungen zu verbessern? Setzen Sie sich mit uns in Verbindung, um fachkundige Beratung, Preise oder eine persönliche Demo zu erhalten.
Senden Sie Ihre Anfrage noch heute
