ホーム製品 LDM-100 不透明度計

LDM-100 不透明度計

LDM-100 monitors the gas turbidity and dust concentration in real-time and continuously in each process pipe and emission flue by measuring the ratio of optical intensity after laser transmission and original optical intensity.

ダウンロードとリソース

製品データシート(PDF) - 詳細スペックと性能データ
ユーザーマニュアル-ステップバイステップのインストールと操作ガイド
ケーススタディオイル＆ガス・アプリケーション - 実際の効率向上
デモビデオ - アナライザーの動作をご覧ください。

製品概要

LDM-100 monitors the gas turbidity and dust concentration in real-time and continuously in each process pipe and emission flue by measuring the ratio of optical intensity after laser transmission and original optical intensity.

原則

LDM-100 adopts Laser Transmission Method to measure the dust concentration. The basalprinciple (refer to Figure 1.1)is using diode laser as the lamp-house. After the detecaser beams passing through the spectroscope, the reflected liaht is detected by thedetector and forms referenced sianals, Transmission light shines to the reflecting materiathrough the measured environment with dust, After the refected liaht traverses themeasured environment again, it is detected by detector and forms measuring sianals.According to the contrast of referenced sianals and measuring sianals, transmittanceinformation caused by dust is obtained.

LDM-100 不透明度計技術仕様

パラメータ	レンジ	詳細 Transmittance: (0~100)%, (80~100)% Turbidity: (100~0)%~(20~0)% Extinction: (0~2.5)~(0~0.1) Measurement concentration: (0~5000) mg/m³ (Concentration is correlative with optical path length, it could be customized base on requirement)
パラメータ	精密	Transmittance/Turbidity: ± 1% Extinction: ± 0.002
Optical path length	(0.5~15)m	-
煙道温度	(-20~600)°C	-
Flue Pressure	Instrument Air Purging: (-20~50)kPa Purging Fan: (-10~8)kPa	-
Specifications	Response: (1~600)s (setting is available) Display Error: ≤ ± 1%F.S. Repetition: ≤ ± 1%F.S. Span Drift: ≤ ± 2%F.S. Enclosure Protection: IP 65	-
Interface Signals	Analogue Output: 2-channel (4~20)mA; Max: 500Ω Digital Output: RS485/GPRS Relay Output: 3-channel output (24V, 1A)	-
Conditions	Power Supply: Measuring Unit: 24V DC <20W Purging Unit: 220 V AC <400W	-
Conditions	Ambient Temperature: (-10~50)°C	-
インストール	Installation: In-situ	-

業種を超えた多彩なアプリケーション

The cement, the thermal power, the iron and steel, the metallurgy, the refinery, the aluminum, the petrochemical, the papermaking, the glass industry, and so on.

主な特徴 LDM-100 不透明度計

Adopts laser transmission method, transmittance, extinction and dust concentration are monitored at the same time;
In-situ installation. Measure rapidly and high precisely in viscous dust and high temperature;
High effect reflecting material technology, high detecting sensitivity and measuring stability;
Modularize designed. Each function part is displaced easily and maintained conveniently;

なぜ LDM-100 不透明度計目立つ

よくある質問

精度の高い分析を可能にする LDM-100 不透明度計

業界をリードするオンライン分析ソリューションで貴社の業務を強化する準備はできていますか？専門家によるガイダンス、価格設定、個別のデモについては、こちらからお問い合わせください。.

関連商品

GRD-2000 熱伝導率ガス分析装置

GTシリーズガス検知器（漏洩検知）

プロマーズ6000 産業用オンライン質量分析計

RLGD-100 リモートレーザー式メタン（CH4）検知器