- +86 571 8501 2111
- [email protected]
- 中国浙江省杭州市濱江区銭墨路459号
LDM-100 monitors the gas turbidity and dust concentration in real-time and continuously in each process pipe and emission flue by measuring the ratio of optical intensity after laser transmission and original optical intensity.
LDM-100 monitors the gas turbidity and dust concentration in real-time and continuously in each process pipe and emission flue by measuring the ratio of optical intensity after laser transmission and original optical intensity.
Principle
LDM-100 adopts Laser Transmission Method to measure the dust concentration. The basalprinciple (refer to Figure 1.1)is using diode laser as the lamp-house. After the detecaser beams passing through the spectroscope, the reflected liaht is detected by thedetector and forms referenced sianals, Transmission light shines to the reflecting materiathrough the measured environment with dust, After the refected liaht traverses themeasured environment again, it is detected by detector and forms measuring sianals.According to the contrast of referenced sianals and measuring sianals, transmittanceinformation caused by dust is obtained.
| Parameters | Range | 詳細 Transmittance: (0~100)%, (80~100)% Turbidity: (100~0)%~(20~0)% Extinction: (0~2.5)~(0~0.1) Measurement concentration: (0~5000) mg/m³ (Concentration is correlative with optical path length, it could be customized base on requirement) |
| Parameters | Precision | Transmittance/Turbidity: ± 1% Extinction: ± 0.002 |
| Optical path length | (0.5~15)m | – |
| Flue Temperature | (-20~600)°C | – |
| Flue Pressure | Instrument Air Purging: (-20~50)kPa Purging Fan: (-10~8)kPa |
– |
| Specifications | Response: (1~600)s (setting is available) Display Error: ≤ ± 1%F.S. Repetition: ≤ ± 1%F.S. Span Drift: ≤ ± 2%F.S. Enclosure Protection: IP 65 |
– |
| Interface Signals | Analogue Output: 2-channel (4~20)mA; Max: 500Ω Digital Output: RS485/GPRS Relay Output: 3-channel output (24V, 1A) |
– |
| Conditions | Power Supply: Measuring Unit: 24V DC <20W Purging Unit: 220 V AC <400W |
– |
| Conditions | Ambient Temperature: (-10~50)°C | – |
| Installation | Installation: In-situ | – |
The cement, the thermal power, the iron and steel, the metallurgy, the refinery, the aluminum, the petrochemical, the papermaking, the glass industry, and so on.
Ready to enhance your operations with industry-leading online analysis solutions? Get in touch for expert guidance, pricing, or a personalized demo.
今すぐお問い合わせください
