- +86 571 8501 2111
- [email protected]
- 459 طريق تشيانمو، منطقة بينجيانغ، هانغتشو، الصين
It is mainly applied to the online monitoring of carbon emission of flue gas components CO, CO2, flue gas parameters (temperature, pressure, flow rate, humidity, oxygen content) emitted by various fixed sources, realizing the carbon emission measurement of fixed pollution source discharge by direct measurement method, and providing data support and calibration for greenhouse gas emission reduction at enterprise level.
It is mainly applied to the online monitoring of carbon emission of flue gas components CO, CO2, flue gas parameters (temperature, pressure, flow rate, humidity, oxygen content) emitted by various fixed sources, realizing the carbon emission measurement of fixed pollution source discharge by direct measurement method, and providing data support و calibration for greenhouse gas emission reduction at enterprise level.
المبدأ
The system uses NDIR technology to measure CO and CO, concentrations and an electrochemi-cal method for O,. The core unit includes an infrared light source, gas chamber, detector, andoptical filters. infrared light passes through the sample gas, with absorbed energy measured bythe detector. The signal is processed through filtering and correction to determine CO and CO,con centrations.
| المبدأ | NDIR |
| Components | CO, CO₂, O₂ |
| النطاق | CO: 0~20% CO₂: 0~1000ppm(Expandable) |
| Linear Error | ≤±2%F.S. |
| الانجراف الصفري | ≤±2%F.S./7d |
| Range Drift | ≤±2%F.S./7d |
| وقت الاستجابة | T90≤120s |
| Warm-up Time | ≤30min |
| درجة الحرارة | 5°C~50°C |
| الرطوبة | ≤95% |
| Ambient Pressure | 80kPa~115kPa |
| Power | AC 220(±10%)V, 50(±1)Hz |
| External Interface | Digital output: RS-232/RS-485; Analog output: 4~20mA |
هل أنت مستعد لتحسين عملياتك باستخدام حلول التحليل عبر الإنترنت الرائدة في المجال؟ تواصل معنا للحصول على إرشادات الخبراء أو الأسعار أو عرض توضيحي مخصص.
أرسل استفسارك اليوم
